(10-18-2021, 07:34 PM)admin Wrote: ...You MUST cut the trace between 12V and the center pad of JP3. Otherwise, you are tying 12V to 5V...
Uhg! That was it. Wasn't aware of the v1.2 manual update. Thanks!
I cut the referenced pad and now all voltages are testing correctly (nice!).
I also noticed that my 7812 and Recom 5v SReg are running much cooler now.
Guessing the short was causing them to fight with each other.
Attaching a view of all the voltages I'm reading on the unpopulated board...