05-22-2016, 06:45 PM
Have you tried a different floppy drive cable (or position in the cable if you have a multi-position cable). What are you powering the drive with? Are you using a single drive or dual drives?
I use the media test program to confirm that all functions of the SuperCard Pro board work correctly, but it's always possible that the board has a problem. Do you have any other drives, including a 3.5" drive that you could use for testing?
Usually, this is problem is the cable or the drive jumpers. I just had a person have the same problem where the flux written back looked like snow over the original data, and it turned out to be the power supply AND the cable were both bad - talk about bad luck!
I use the media test program to confirm that all functions of the SuperCard Pro board work correctly, but it's always possible that the board has a problem. Do you have any other drives, including a 3.5" drive that you could use for testing?
Usually, this is problem is the cable or the drive jumpers. I just had a person have the same problem where the flux written back looked like snow over the original data, and it turned out to be the power supply AND the cable were both bad - talk about bad luck!