bad data packet crc-32

[shawn.henson73@gmail.com]

Im using the wimodem232 with amiga 3000.
Everything works fine except when I want to up or download files.
I get 

Data packet too large Then
bad data packet crc-32 

The term program is set at 19200  8n1
Serial port on the amiga is set for 19200 8n1  RTS/CTS  and buffer at 1024

Im using zmodem for transfers (but it does it with any protocol )

Modem is on current firmware  6.20   6/3/23
modem also reports 19200 8n1


What stupid simple thing am I missing?

Ive done this and no change
Problem: I connected to a BBS and when I start a download it immediately
starts having bad blocks and retries.
Solution: Make sure that the translation mode is set to 0 (AT*T0). This
turns off the Telnet translation.

[shawn.henson73@gmail.com]

Found a answer in another thread

https://www.cbmstuff.com/forum/showthrea...82#pid2882

[admin]

Yes, you definitely need to set the translation mode to match what you are connecting to! Also don't forget that you need to enable the hardware handshaking using AT&K1.