Wimodem amiga adapter
#11
(06-01-2017, 08:05 AM)admin Wrote: So, you have two different serial ports - no need for a pass-through!

Practically I could use a 2 way port splitter and solve that but i wanted to avoid extra dangling participles.. Big Grin
Reply
#12
Huh?  A standard RS-232 port contains only a single serial port.  There is no such thing as having multiple serial ports (port 0, port 1, etc.) contained within a DB-25 connector.  This is why a pass-through is never needed.  A RS-232 serial port can only have one device connected to it at a time (unlike RS-422 and RS-485).
Reply
#13
(06-01-2017, 12:42 PM)admin Wrote: Huh?  A standard RS-232 port contains only a single serial port.  There is no such thing as having multiple serial ports (port 0, port 1, etc.) contained within a DB-25 connector.  This is why a pass-through is never needed.  A RS-232 serial port can only have one device connected to it at a time (unlike RS-422 and RS-485).

Well I have one right here that i used on my 1200 tower.Had a audio digitizer on one end and modem on the other..: Tongue
Reply
#14
Your audio digitizer is plugged into the parallel port, not a serial port.  You can't digitize through a serial port.  All Amigas have a single serial port, parallel port, video port, and floppy port.
Reply
#15
(06-01-2017, 06:11 PM)admin Wrote: Your audio digitizer is plugged into the parallel port, not a serial port.  You can't digitize through a serial port.  All Amigas have a single serial port, parallel port, video port, and floppy port.

digitizer also has a midi port.
Reply




Users browsing this thread: 1 Guest(s)