02-04-2023, 05:36 PM
Hello,
I am using the WiModem232 with an Amiga 500 w/ ACA500Plus. I am using the 8n1.device with NComm 3.06. Connecting to BBS’s at 19200 baud works great and the old 8n1.device was a huge improvement in speed versus the regular serial.device. However, I continually have errors when downloading with Zmodem protocol. The transfer starts out ok, but then has CRC errors that never recover. I set the AT*T=1 for telnet translation. Without the translation, the DL would fail to start without errors.
Any ideas on settings in NComm or the device that would resolve this? The BBS’s I am on do not offer Ymodem, only Zmodem, Zmodem8k, or Hydra.
I would appreciate any help, thanks!
I am using the WiModem232 with an Amiga 500 w/ ACA500Plus. I am using the 8n1.device with NComm 3.06. Connecting to BBS’s at 19200 baud works great and the old 8n1.device was a huge improvement in speed versus the regular serial.device. However, I continually have errors when downloading with Zmodem protocol. The transfer starts out ok, but then has CRC errors that never recover. I set the AT*T=1 for telnet translation. Without the translation, the DL would fail to start without errors.
Any ideas on settings in NComm or the device that would resolve this? The BBS’s I am on do not offer Ymodem, only Zmodem, Zmodem8k, or Hydra.
I would appreciate any help, thanks!