08-15-2022, 03:47 AM
Finding the board and finding a floppy drive are two completely different things. It should always find the board. Make sure that the USB drivers are installed correctly and you don't have some type of anti-virus that blocks the USB port (most anti-virus programs can do that).
Look at HUEY and DUEY chips. If you see any type of burn mark or odd spot, then the chip is damaged - but that will not cause a "board not found" message.
Look at HUEY and DUEY chips. If you see any type of burn mark or odd spot, then the chip is damaged - but that will not cause a "board not found" message.