01-11-2022, 07:45 PM
(This post was last modified: 01-12-2022, 06:59 AM by Digital Man.)
(10-24-2021, 06:01 PM)admin Wrote: The WHD program is only for the C64 side, and it DOES require the UP9600 hack for it to work (it runs the transfers at 9600 baud). The new version of the WHD just no longer required that you had the WiModem already set to 9600 baud - it can now be either 2400 baud or 9600 baud and work. I do have a version that (sort of) works at 38400 baud, but currently that also requires the serial shift register (UP9600 hack) to get 38400 baud. I did a version originally that was bit-banged at about 50Kbps. That worked one direction, but not the other. I think maybe if I lower the speed a bit it would work in both directions, and does not require the UP9600 hack.
Just reading through this.... any plans for C128 support? (c64 mode or not).
Also, I thought I remembered adding a file transfer or image upload support was in the works? For example, I could upload an image to the WiModem memory from a PC then use a copier or something on the CBM side to copy to a real disk. WiCopy! That was it. Just read though some old threads. Is that still on the horizon?