05-30-2021, 05:59 PM
It should be noted that the ICD P:R: Connection and ICD MIO use the same pinouts for their RS232.
The MetalGuy66 reproduction of the MIO uses standard RS232 cables.
I don't remember for certain if the ICD P:R: Connection's Port 2 is identical to port 1, or a "stripped down" port like the 850's, but I'm almost certain it's normal.
A few of us have been using these quite successfully for both running and calling BBS's both on the Atari 8-bits and the ST's. It's a great device.
The MetalGuy66 reproduction of the MIO uses standard RS232 cables.
I don't remember for certain if the ICD P:R: Connection's Port 2 is identical to port 1, or a "stripped down" port like the 850's, but I'm almost certain it's normal.
A few of us have been using these quite successfully for both running and calling BBS's both on the Atari 8-bits and the ST's. It's a great device.