12-31-2017, 03:32 AM
Ok, I've uploaded version 1.2.1 to the same place.
I think I figured out the problem with transfers. I needed to turn off Telnet translation on my side.
I successfully sent a batch of 12 files via Zmodem to Striketerm. Quite quick too.
I've also added some more logging so if you get a connection failure, it should report an error code.
I'm going to see if I can set up an amiga terminal on my MIST fpga and see if I can connect. (Ive soldered on a header for the rs232 port)
Its not the same as using a wimodem232 I know, but hopefully I can get it close enough.
I think I figured out the problem with transfers. I needed to turn off Telnet translation on my side.
I successfully sent a batch of 12 files via Zmodem to Striketerm. Quite quick too.
I've also added some more logging so if you get a connection failure, it should report an error code.
I'm going to see if I can set up an amiga terminal on my MIST fpga and see if I can connect. (Ive soldered on a header for the rs232 port)
Its not the same as using a wimodem232 I know, but hopefully I can get it close enough.