(12-12-2014, 11:25 AM)admin Wrote: If you remove J1, it kills power to the board. Replacing J1 restores power to the board, so that will reset it. You should not have to unplug the USB cable to kill the power.I followed your instructions to the letter, but power to the board wasn't the issue - it was that until I unplugged the USB cable and plugged it back in, the updater software could not find the SuperCard Pro.
This is probably an issue with the operating system, not your software or hardware. I suspect that when I removed J1, Windows 7 lost the USB connection.