Media test issue
#5
I have been cleaning the heads with a Q-tip dampened with alcohol.  What do you recommend?  I've heard that the "disks" made for that purpose are ineffective and short-lived.

The power supply I've been using was furnished with a Kryoflux board.  It is labeled "PHOBYA Model RK-34-12/5 - 2000mA" and states that it outputs 12V at 2A and 5V at 2A.  Measuring 1x1.5x4 inches, it certainly does not have a very large capacitor inside.  I've never tested the output but that may be a source of ripple.  I'll try another source to power the drives and repeat the tests.

The generic disk is tighter in its jacket than the 3M.
Reply


Messages In This Thread
Media test issue - by clh333 - 09-24-2015, 05:45 AM
RE: Media test issue - by admin - 09-24-2015, 07:29 AM
RE: Media test issue - by clh333 - 09-25-2015, 06:37 AM
RE: Media test issue - by admin - 09-25-2015, 08:20 AM
RE: Media test issue - by clh333 - 09-26-2015, 06:07 AM
RE: Media test issue - by admin - 09-26-2015, 09:02 AM
RE: Media test issue - by SomeGuy - 09-26-2015, 11:34 AM
RE: Media test issue - by admin - 09-26-2015, 04:19 PM
RE: Media test issue - by clh333 - 10-22-2015, 10:36 AM
RE: Media test issue - by admin - 10-23-2015, 08:48 AM
RE: Media test issue - by clh333 - 01-28-2016, 07:08 AM
RE: Media test issue - by admin - 01-28-2016, 08:52 AM
RE: Media test issue - by clh333 - 01-28-2016, 09:40 AM
RE: Media test issue - by admin - 01-28-2016, 01:14 PM



Users browsing this thread: 3 Guest(s)