02-11-2023, 12:40 PM
I own two WiModems. One connects directly to the C64 and one connects to a DB25. Both of these WiModems will not connect to my router using manual commands.
If I type AT*SSIDrouter,password it will not connect. However, if I type AT*NSx,password it connects fine. I'm trying to write software to interface with the WiModem, but I need to be able to enter the SSID manually which doesn't work on either WiModem.
The other WiModem uses a different command set. I have to type AT$SSID=router and AT$PASS=password, and then ATC1 to connect. It does not connect.
Anyone know what's going on?
If I type AT*SSIDrouter,password it will not connect. However, if I type AT*NSx,password it connects fine. I'm trying to write software to interface with the WiModem, but I need to be able to enter the SSID manually which doesn't work on either WiModem.
The other WiModem uses a different command set. I have to type AT$SSID=router and AT$PASS=password, and then ATC1 to connect. It does not connect.
Anyone know what's going on?