02-23-2022, 10:56 AM
After you change the baud using AT*B and see the "OK" message you would then need to change the terminal's baud rate to be whatever baud rate you selected. I don't know how to set the baud rate in PET TERM as I have never used it.
The baud rate shown in the display will not change until the physical (external) baud rate has changed. I should probably just make that the baud rate that was changed instead of waiting on the first character at the new baud rate to arrive or be sent.
The WiModem is 100% Hayes compatible modem emulator. So, just like with a real modem any changes you make have to be deliberately saved by entering the command AT&W <RETURN>.
The baud rate shown in the display will not change until the physical (external) baud rate has changed. I should probably just make that the baud rate that was changed instead of waiting on the first character at the new baud rate to arrive or be sent.
The WiModem is 100% Hayes compatible modem emulator. So, just like with a real modem any changes you make have to be deliberately saved by entering the command AT&W <RETURN>.