06-28-2021, 08:39 AM
Jim,
I've used my Supercard Pro to copy a fresh formatted and rebuilt boot Floppy.
The floppy boots fine on my Kaypro II, so I copied it as a CP?m Floppy with my
Supercard Pro (using indexed). I then write the *.SCP file back to a fresh floppy
and it does not boot on the Kaypro II.
I can not attached the scp.zip file because it is too large. How can I get it sent to you? The Floppy Definiitions
for the Kaypro II are:
BEGIN KAY1 Kaypro II/2 - SSDD 48 tpi 5.25" - 512 x 10
DENSITY MFM LOW
CYLINDERS 40 SIDES 1 SECTORS 10 512 SKEW 4
SIDE1 0 0,1,2,3,4,5,6,7,8,9
BSH 3 BLM 7 EXM 0 DSM 194 DRM 63 AL0 0F0H AL1 0 OFS 1
END
# KAY1 Kaypro II/2 - SSDD 48 tpi 5.25" - 512 x 10
diskdef kay1
seclen 512
tracks 40
sectrk 10
secbase 0
blocksize 1024
maxdir 64
dirblks 2
skew 1
boottrk 1
os 2.2
end
# libdsk data below
[kay1]
description = KAY1 Kaypro II/2 - SSDD 48 tpi 5.25" - 512 x 10
cylinders = 40
heads = 1
secsize = 512
sectors = 10
secbase = 0
datarate = DD
Thanks.
Larry
I've used my Supercard Pro to copy a fresh formatted and rebuilt boot Floppy.
The floppy boots fine on my Kaypro II, so I copied it as a CP?m Floppy with my
Supercard Pro (using indexed). I then write the *.SCP file back to a fresh floppy
and it does not boot on the Kaypro II.
I can not attached the scp.zip file because it is too large. How can I get it sent to you? The Floppy Definiitions
for the Kaypro II are:
BEGIN KAY1 Kaypro II/2 - SSDD 48 tpi 5.25" - 512 x 10
DENSITY MFM LOW
CYLINDERS 40 SIDES 1 SECTORS 10 512 SKEW 4
SIDE1 0 0,1,2,3,4,5,6,7,8,9
BSH 3 BLM 7 EXM 0 DSM 194 DRM 63 AL0 0F0H AL1 0 OFS 1
END
# KAY1 Kaypro II/2 - SSDD 48 tpi 5.25" - 512 x 10
diskdef kay1
seclen 512
tracks 40
sectrk 10
secbase 0
blocksize 1024
maxdir 64
dirblks 2
skew 1
boottrk 1
os 2.2
end
# libdsk data below
[kay1]
description = KAY1 Kaypro II/2 - SSDD 48 tpi 5.25" - 512 x 10
cylinders = 40
heads = 1
secsize = 512
sectors = 10
secbase = 0
datarate = DD
Thanks.
Larry