11-12-2014, 12:44 PM
(11-12-2014, 12:12 PM)admin Wrote: Pin 5 (which is the 3rd pin over) is the correct missing pin (I fixed my previous post about this). I went back and checked my inventory of boards and some floppy drives, and this is definitely the correct pin to be missing. Your cable has the wrong hole plugged! The cables I sell don't have a plugged hole at all.
I can see the confusion because pin 5 is the 3rd one over, so it might have looked like I was referring to that one, but yeah - I have a weird cable with pin 3 blocked!
No worries though, I've ordered a cable with no plugged holes. I'm just impatient to start using the board!
