Kaypro II CP/M Boot Disk - SCP Creation

[ldkraemer]

OK, I've ripped a Mitsubishi Model M4851-112U 360K DSDD Floppy drive from a friends Leading Edge Model "M".

I've read my Kaypro CP/M Boot floppy with my Supercard Pro, set for a 48 TPI Drive with "LOW Density Read & Write"
and 40 Cylinders with "CP/M" and "INDEX". The Drive is Strapped for DS1, and is on the End Edge Connector of your cable,
which is Drive 0 (via twisted cable) to the SuperCard Pro.

Here is what SAMdisk detects from the KP2Boot2.scp image:

[KP2Boot2.scp]
Warning: 40 missing or invalid stream tracks
40 Cyls, 2 Heads:
250Kbps MFM, 10 sectors, 512 bytes/sector:
0.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=2:
1.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=4:
2.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=6:
3.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=8:
4.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=10:
5.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=12:
6.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=14:
7.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=16:
8.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=18:
9.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=20:
10.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=22:
11.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=24:
12.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=26:
13.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=28:
14.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=30:
15.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=32:
16.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=34:
17.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=36:
18.0 0 8 3 6 1 9 4 7 2 5
250Kbps MFM, 10 sectors, 512 bytes/sector, c=38:
19.0 0 8 3 6 1 9 4 7 2 5
20.0 missing
21.0 missing
22.0 missing
23.0 missing
24.0 missing
25.0 missing
26.0 missing
27.0 missing
28.0 missing
29.0 missing
30.0 missing
31.0 missing
32.0 missing
33.0 missing
34.0 missing
35.0 missing
36.0 missing
37.0 missing
38.0 missing
39.0 missing
0.1 <blank>
1.1 <blank>
2.1 <blank>
3.1 <blank>
4.1 <blank>
5.1 <blank>
6.1 <blank>
7.1 <blank>
8.1 <blank>
9.1 <blank>
10.1 <blank>
11.1 <blank>
12.1 <blank>
13.1 <blank>
14.1 <blank>
15.1 <blank>
16.1 <blank>
17.1 <blank>
18.1 <blank>
19.1 <blank>
20.1 missing
21.1 missing
22.1 missing
23.1 missing
24.1 missing
25.1 missing
26.1 missing
27.1 missing
28.1 missing
29.1 missing
30.1 missing
31.1 missing
32.1 missing
33.1 missing
34.1 missing
35.1 missing
36.1 missing
37.1 missing
38.1 missing
39.1 missing

Do you think it's possible I have a bad drive that is causing this problem? That old Leading Edge Model "M" has a second Floppy
I'm going to rip out and test. What do you think the chances are that both Floppy's will give duplicate results? Or do you have any
other suggestions for me to try?

Thanks.

Larry