03-17-2024, 01:12 AM
Using AT&F resets everything except for the baud rate and SSID/password. The only way to remove the SSID or password is by typing AT*SSID with either nothing or an invalid router name after it. That will scan the network and not find anything which resets the SSID/password to invalid.
I can't clear the SSID/password using AT&F because that is a very commonly used command and would then require you to setup your router every time.
Using the RESET button resets everything including the baud rate, but does not reset the SSID/password as people complained about that previously so I removed that.
I can't clear the SSID/password using AT&F because that is a very commonly used command and would then require you to setup your router every time.
Using the RESET button resets everything including the baud rate, but does not reset the SSID/password as people complained about that previously so I removed that.