Separate Joystick Board?

[Thumb]

While waiting for the keycaps to get printed, I was wondering about how I will be able to connect my joysticks, is there a board I need to get?

[admin]

There will be an add-on board. It replaces the plastic plug that blocks the two DB9 holes. The board plugs into the Razzle board using a 4 wire cable. This is of course for the BlingBox™, as the Blingboard64 does not have any way to attach joysticks.

[Thumb]

Thanks for the info, I'll make sure I get one. 

[acidsulfuric]

There will be an add-on board.  It replaces the plastic plug that blocks the two DB9 holes.  The board plugs into the Razzle board using a 4 wire cable.  This is of course for the BlingBox™, as the Blingboard64 does not have any way to attach joysticks.

Hi admin, will the joystick add-on board support both standard and custom joystick mappings, or will it just replicate the original C64 joystick inputs?

[admin]

I have the mapping that is used for a standard joystick (they are all the same), but I could make a custom map if needed.