+- CBMSTUFF FORUM (https://www.cbmstuff.com/forum)
+-- Forum: CBMSTUFF PRODUCTS (https://www.cbmstuff.com/forum/forumdisplay.php?fid=1)
+--- Forum: BLINGBOARD64 CAMPAIGN (https://www.cbmstuff.com/forum/forumdisplay.php?fid=143)
+--- Thread: Separate Joystick Board? (/showthread.php?tid=1156)
Separate Joystick Board? - Thumb - 03-01-2025
While waiting for the keycaps to get printed, I was wondering about how I will be able to connect my joysticks, is there a board I need to get?
RE: Separate Joystick Board? - admin - 03-02-2025
There will be an add-on board. It replaces the plastic plug that blocks the two DB9 holes. The board plugs into the Razzle board using a 4 wire cable. This is of course for the BlingBox™, as the Blingboard64 does not have any way to attach joysticks.
RE: Separate Joystick Board? - Thumb - 03-02-2025
Thanks for the info, I'll make sure I get one.
RE: Separate Joystick Board? - acidsulfuric - 10-13-2025
(03-02-2025, 08:38 AM)admin Wrote: There will be an add-on board. It replaces the plastic plug that blocks the two DB9 holes. The board plugs into the Razzle board using a 4 wire cable. This is of course for the BlingBox™, as the Blingboard64 does not have any way to attach joysticks.
Hi admin, will the joystick add-on board support both standard and custom joystick mappings, or will it just replicate the original C64 joystick inputs?
RE: Separate Joystick Board? - admin - 10-15-2025
I have the mapping that is used for a standard joystick (they are all the same), but I could make a custom map if needed.