ADF support!

[GeoKM]

Hi Jim,

Amiga Floppy Archiving is moving along now 8-)

I am seeing something interesting though.

My general process is, Quick clean using Alignment utility, then Flux image using Amiga mode SPLICE 2 Revs.

For most disks this works. Occasionally I have had to go as high as 5 Revs but only on a few.

However I am seeing something interesting.

To test each Flux image I then try and do a convert using your SCP program from FLUX image to ADF. This actually only works about 30% of the time, even for images that turn out to be 100% OK.

What I see is the read of the flux side GREEN up to 50% then it stops with an error.

I then take that Flux Image, put it through HxC, build an ADF that way and then put the ADF into the Amiga to test with Dave Haynie's DiskSalv 4. which generally tests all OK.

I only see this happen with SCP when the 1st 50% of the conversion is all Green and even then only about 30% of the time. Sometimes the Conversion goes Green all the way to track 79 and I still test with DiskSalv 4.

Would you like me to send you an example of a file that does it and one that goes to 100 % to see if you can reproduce?

Thanks.
8-)