Using CCGMS 2022 as terminals for both calling and receiving commodore 128s; both using WiModem.
My thought: I think maybe not a WiModem problem, but the "driver" of the modem. (U9600 vs Standard User port).
Calling method is performing atdt to the domain name (so going straight out door to external IP and back into the house via WIFI).
Successful test using CCGMS 2022:
U9600 Modem setting, 9600 baud rate selected; Punter and XModem tested
Failed in CCGMS 2022 (C128 and C64 tested) and Syncterm (PC using XModem)):
Standard Modem setting, 2400 or 1200 baud.
Color64 v8 BBS software does not allow me to specify modem type - so maybe that's the problem. I'm going to try EBBS as there is another post on this forum saying it worked.
My thought: I think maybe not a WiModem problem, but the "driver" of the modem. (U9600 vs Standard User port).
Calling method is performing atdt to the domain name (so going straight out door to external IP and back into the house via WIFI).
Successful test using CCGMS 2022:
U9600 Modem setting, 9600 baud rate selected; Punter and XModem tested
Failed in CCGMS 2022 (C128 and C64 tested) and Syncterm (PC using XModem)):
Standard Modem setting, 2400 or 1200 baud.
Color64 v8 BBS software does not allow me to specify modem type - so maybe that's the problem. I'm going to try EBBS as there is another post on this forum saying it worked.