08-12-2019, 06:13 PM
Thanks. At a glance, this appears to work. I was able to dump a 360k disk in a 1.2mb drive, I got the appropriate tracks where I expected them to be, and the disk content appeared complete.
On the separate issue of 360RPM<>300RPM conversion, I'm still not seeing that working. I took the very image I read, switched to a 360k drive, changed the settings to "48tpi", made sure the "override" box was checked, and wrote the image.
The resulting disk had the tracks "squished" to about 80% of length they should be, and mostly unreadable.
On the separate issue of 360RPM<>300RPM conversion, I'm still not seeing that working. I took the very image I read, switched to a 360k drive, changed the settings to "48tpi", made sure the "override" box was checked, and wrote the image.
The resulting disk had the tracks "squished" to about 80% of length they should be, and mostly unreadable.