07-04-2017, 09:47 AM
still no luck :/
I've tried different cables, different drives (SAMSUNG SFD-321B REV.T7 from a old Compaq PC) tried but nothing.
So I took the floppy disk drive (Samsung SFD-321B REV.T3) from CNC machine and I noticed it has different jumper settings.
When I plug it to SPC, its motor simply doesnt move.
![[Image: 19732009_10209646406418591_9090043557223...e=5A04639E]](https://scontent-dft4-1.xx.fbcdn.net/v/t1.0-9/19732009_10209646406418591_9090043557223713431_n.jpg?oh=208311d05611ed35a5ba0a3ce5c5b8fc&oe=5A04639E)
![[Image: 19732231_10209646406458592_8097548276255...e=5A10C815]](https://scontent-dft4-1.xx.fbcdn.net/v/t1.0-9/19732231_10209646406458592_8097548276255394737_n.jpg?oh=c5d5f8e5e3d8a1d2de05dad2d7382922&oe=5A10C815)
I've tried different cables, different drives (SAMSUNG SFD-321B REV.T7 from a old Compaq PC) tried but nothing.
So I took the floppy disk drive (Samsung SFD-321B REV.T3) from CNC machine and I noticed it has different jumper settings.
When I plug it to SPC, its motor simply doesnt move.