09-29-2015, 11:42 AM
You can only create .g64 images from disks that were produced using the INDEX mark to start/stop tracks (which is most all commercially distributed disks). You need to use INDEX (not SPLICE) for these disks.
You can copy any non-index'd disks just fine, you just can't create .g64 images with these. This is something that I need to work on. The purpose of SuperCard Pro is not for converting disks to various image formats, it's for duplicating/imaging original disks.
There is no support for reading/writing the backside of a disk directly. The disk has to be flipped over. The pull-down menu option is there, but the handler code has not been completed yet. It's not a high priority thing at the moment.
You can copy any non-index'd disks just fine, you just can't create .g64 images with these. This is something that I need to work on. The purpose of SuperCard Pro is not for converting disks to various image formats, it's for duplicating/imaging original disks.
There is no support for reading/writing the backside of a disk directly. The disk has to be flipped over. The pull-down menu option is there, but the handler code has not been completed yet. It's not a high priority thing at the moment.