The best I/O board solution for the DE-10 Nano!  Comes with custom heatsink and fan!

This board gives your Terasic DE-10 Nano board a real-time clock, VGA output (w/Sync-on-green option), stereo audio and TOSLink outputs, and break outs of the LTC connector to provide SPI and I2C interfaces.  There are also breakouts for 7 Arduino/FPGA pins to provide serial, USB, or whatever function you might want to create.  There is a large cutout on the board to allow for plug-in type SDRAM modules to be used, like the SDRAM STICK options that we offer.


There is a micro-SD card socket, 3 LEDs and 3 push buttons, and connectors for external LEDs and external push buttons. Includes a custom made large heat sink! The heat sink is 25mm x 25mm x 10mm and covers the entire FPGA surface. Quality 3M brand thermal conductive tape is included. Just remove the backing and stick the heat sink to the top of the DE-10's FPGA chip.
  A quiet 30mm fan is also included as an option.  This is installed by the user with the included 4 screws and nuts.  It's a simple plug-in connection.  The fan is not required unless you are putting the DE-10 Nano and DE-10 Super Expansion Board inside of an enclosure.

Professionally assembled using a 4 layer PCB with excellent grounding and decoupling insures that the SDRAM works at >150MHz with all DE-10 Nano boards!  Uses custom made interconnect to bring the LTC port to break out connectors.


Comes fully assembled and tested, and has a limited lifetime warranty. FCC/IC/ETSI approved. CE
compliancy. ROHS (lead free) construction.

Note: students enrolled in CPLD programming courses in CA and MA, please contact your instructor for information on purchasing this product through your university's student store. Universities are welcome to contact us for volume pricing.


Compatible with MiSTer cores. 
 Click here for MiSTer information!

Specifications:


SDRAM: None

Real Time Clock: MCP49410 w/EEPROM and SRAM, battery back up, pull-up resistors w/bypass

Analog audio output: bandpass filter for clean audio output

Digital audio output: TOSLink (SPDIF)

SD card: micro

VGA: DB15 w/SOG

Fan: 30mm,18dB, supplied (user mounted)

Battery: CR1220 (user supplied)

Certifications: FCC/IC/ETSI, CE

Size: Full size w/holes for screws (not included) Weight: 5.5oz


Write a review

Please login or register to review

DE-10 Multi Expansion Board

  • Brand: CBMSTUFF.COM
  • Product Code: DE-10 Multi Expansion Board
  • Availability: In Stock
  • $43.95


Related Products

128MB SDRAM Module for DE-10 Nano

Just plug this board into your DE-10 and give MiSTer and other FPGA cores 128MB of available SDRAM!L..

$49.95

DE-10 Heatsink

CUSTOM DESIGNED FOR THE DE-10 NANO!This is a high quality heatsink that fits over the entire top of ..

$3.95

USB Wifi Dongle

Plug in play! Just plug this WiFi dongle into a USB port connected to the MiSTer (using a USB OTG ad..

$5.50