https://www.cbmstuff.com/forum/ Sat, 11 Apr 2026 08:26:26 +0000 MyBB https://www.cbmstuff.com/forum/showthread.php?tid=651 Mon, 16 Sep 2019 02:04:34 -0400 admin]]> https://www.cbmstuff.com/forum/showthread.php?tid=651
Remove the 6502 from it's socket in the 1541 drive and place it on the Supercard+ board with the notch facing the nearest edge of the board.  Plug the cable end into the 6502 socket with the notch facing towards the back the drive.  Tuck the Supercard+ into the slot between the metal chassis and the plastic case, with the solder side of the board touching the plastic.  Fold the cable over as shown.  That's it!

  sc1541-1.jpg (Size: 325 KB / Downloads: 43)

  sc1541-2.jpg (Size: 251.46 KB / Downloads: 25)

  sc1541-3.jpg (Size: 432.22 KB / Downloads: 36)

  sc1541-4.jpg (Size: 435.35 KB / Downloads: 39)

  sc1541-5.jpg (Size: 290.91 KB / Downloads: 39) ]]>
Remove the 6502 from it's socket in the 1541 drive and place it on the Supercard+ board with the notch facing the nearest edge of the board.  Plug the cable end into the 6502 socket with the notch facing towards the back the drive.  Tuck the Supercard+ into the slot between the metal chassis and the plastic case, with the solder side of the board touching the plastic.  Fold the cable over as shown.  That's it!

  sc1541-1.jpg (Size: 325 KB / Downloads: 43)

  sc1541-2.jpg (Size: 251.46 KB / Downloads: 25)

  sc1541-3.jpg (Size: 432.22 KB / Downloads: 36)

  sc1541-4.jpg (Size: 435.35 KB / Downloads: 39)

  sc1541-5.jpg (Size: 290.91 KB / Downloads: 39) ]]> https://www.cbmstuff.com/forum/showthread.php?tid=587 Mon, 29 Oct 2018 20:21:16 -0400 bluebirdpod]]> https://www.cbmstuff.com/forum/showthread.php?tid=587
Of course the belt driven version has a potentiometer and is easily changed. but it seems to me that after looking in the news groups and
forums and google all over the place that someone has done it, but how can it be done ?

This mod is not for the novice as the spindle motor has to be dis-assembled and small wiring and mods need to be done, esp since there
isn't much room under the flywheel, but I know it should be possible.

-bbp]]>
Of course the belt driven version has a potentiometer and is easily changed. but it seems to me that after looking in the news groups and
forums and google all over the place that someone has done it, but how can it be done ?

This mod is not for the novice as the spindle motor has to be dis-assembled and small wiring and mods need to be done, esp since there
isn't much room under the flywheel, but I know it should be possible.

-bbp]]> https://www.cbmstuff.com/forum/showthread.php?tid=302 Mon, 21 Mar 2016 19:26:12 -0400 Blitvig]]> https://www.cbmstuff.com/forum/showthread.php?tid=302
  SC.jpg (Size: 402.63 KB / Downloads: 27) ]]>
  SC.jpg (Size: 402.63 KB / Downloads: 27) ]]> https://www.cbmstuff.com/forum/showthread.php?tid=259 Tue, 17 Nov 2015 12:37:18 -0500 visualmess]]> https://www.cbmstuff.com/forum/showthread.php?tid=259
  SC+ 2K ram capture wiring instructions 03-27-1990.txt (Size: 2.46 KB / Downloads: 48)

  SC+ 2k extra1 03-27-1990.txt (Size: 609 bytes / Downloads: 31)

  SC+ 2K extra2 04-02-1990.txt (Size: 564 bytes / Downloads: 28)

  SC+ NEW RAPID-LOCK PROTECTION 02-12-1990.txt (Size: 381 bytes / Downloads: 42)

  UU Jim READ THIS!! 07-06-1990.txt (Size: 1.49 KB / Downloads: 43)

  UU\'s Support BBS 03-10-1990.txt (Size: 1.33 KB / Downloads: 22)

  super-card plus settings 08-13-1990.txt (Size: 8.9 KB / Downloads: 47)

  SC+ with 2k ram switch installed smaller.jpg (Size: 305.3 KB / Downloads: 30) ]]>
  SC+ 2K ram capture wiring instructions 03-27-1990.txt (Size: 2.46 KB / Downloads: 48)

  SC+ 2k extra1 03-27-1990.txt (Size: 609 bytes / Downloads: 31)

  SC+ 2K extra2 04-02-1990.txt (Size: 564 bytes / Downloads: 28)

  SC+ NEW RAPID-LOCK PROTECTION 02-12-1990.txt (Size: 381 bytes / Downloads: 42)

  UU Jim READ THIS!! 07-06-1990.txt (Size: 1.49 KB / Downloads: 43)

  UU\'s Support BBS 03-10-1990.txt (Size: 1.33 KB / Downloads: 22)

  super-card plus settings 08-13-1990.txt (Size: 8.9 KB / Downloads: 47)

  SC+ with 2k ram switch installed smaller.jpg (Size: 305.3 KB / Downloads: 30) ]]> https://www.cbmstuff.com/forum/showthread.php?tid=215 Mon, 02 Mar 2015 16:16:00 -0500 Volkybaba]]> https://www.cbmstuff.com/forum/showthread.php?tid=215

---

Photo 2

---

Photo3

---

Photo4

  image.jpg (Size: 115.5 KB / Downloads: 56)

  image.jpg (Size: 102.04 KB / Downloads: 50)

  image.jpg (Size: 116.02 KB / Downloads: 50)

  image.jpg (Size: 65.54 KB / Downloads: 45) ]]>

---

Photo 2

---

Photo3

---

Photo4

  image.jpg (Size: 115.5 KB / Downloads: 56)

  image.jpg (Size: 102.04 KB / Downloads: 50)

  image.jpg (Size: 116.02 KB / Downloads: 50)

  image.jpg (Size: 65.54 KB / Downloads: 45) ]]> https://www.cbmstuff.com/forum/showthread.php?tid=55 Sun, 22 Dec 2013 00:53:03 -0500 admin]]> https://www.cbmstuff.com/forum/showthread.php?tid=55