03-24-2023, 06:56 PM
AT&F is the ONLY thing that will reset the OFFHOOK string unless you have somewhere that does AT*OFFHOOK= (without any text, which will erase the text completely).
Check to see what firmware version you are really using (ATI). I tested this a bunch today and everything works perfectly.
What is in the "RESET.MDM" file?
You SHOULD be using AT&K1 with anything over 2400 baud. AT&K0, AT&K2, and AT&K3 all turn OFF the hardware flow control. You WANT that on for your BBS. Without the hardware flow control, you will have errors sending any large chunks of data when the receiver is telling the sender to stop sending data.
Check to see what firmware version you are really using (ATI). I tested this a bunch today and everything works perfectly.
What is in the "RESET.MDM" file?
You SHOULD be using AT&K1 with anything over 2400 baud. AT&K0, AT&K2, and AT&K3 all turn OFF the hardware flow control. You WANT that on for your BBS. Without the hardware flow control, you will have errors sending any large chunks of data when the receiver is telling the sender to stop sending data.