03-25-2023, 03:51 PM
(03-14-2023, 12:20 AM)admin Wrote: I am not sure why you would ever forward anything as it is definitely not necessary if you are using a local network connection (connecting from any device on the same network as the WiModem).
What BBS software? Have you read the manual for the BBS software to see if it is looking for the DCD to change as opposed to looking for 'RING'? If so, then you need to enable the auto-answer setting, just as you would with a real modem. You can do that by using ATS0=x, where 'x' is the number of 'rings' before automatically answering the incoming call. Most people use ATS0=1.
Still working on it.
I am unable to find documentation the program (FRPBBS) that mentions the connection type. The reason I am forwarding the port is because I am connecting from outside of my LAN.
I did the ATS0=1 command within the terminal. The modem now displays 'connected' when I dial in from a remote terminal but the BBS program still does not seem to activate. The terminal screen also remains blank. Does this mean that the WiModem is connecting aside from the BBS app?