01-21-2024, 12:33 AM
(01-20-2024, 08:22 AM)DarkLord Wrote:(01-19-2024, 11:53 PM)bbsing Wrote: How do I get my OLED to be brighter?
It’s barely visible.
I’m using wimodem with OLED for the c64 and c128
firmware version v6.20-06/03/23
According to the PDF and what I use here:
AT*LED[x] – Get/Set LED brightness [0-9] This command will change the brightness of the LED. A value of 0 turns off the LED completely. Default is 5.
Don't forget to AT&W and save your settings afterwards.
Hope this helps.
Hi DarkLord.
That works for the LED, but not the OLED, and I thank you for providing your response.
The OLED is the tiny display screen (That is what I thought it was).
Now on my wimodem the LED is functioning great, ... but the OLED ... that is hardly even visible.
I don’t know if I just have a bad OLED, or something is correct, or this is some special setting. My wimodem is probably one of the older ones as well.