01-20-2024, 08:22 AM
(01-19-2024, 11:53 PM)bbsing Wrote: How do I get my OLED to be brighter?
It’s barely visible.
I’m using wimodem with OLED for the c64 and c128
firmware version v6.20-06/03/23
According to the PDF and what I use here:
AT*LED[x] – Get/Set LED brightness [0-9] This command will change the brightness of the LED. A value of 0 turns off the LED completely. Default is 5.
Don't forget to AT&W and save your settings afterwards.
Hope this helps.