02-04-2014, 04:43 PM
There is currently no way to verify the flux image. So, why does it work now when it didn't before? Well, it could be that you had some dirt on the head or disk and it was knocked off. You might also have had a destination floppy that had a "film" over it. I have found many cases where a disk won't work for writing the first time, but after reading it a few times it suddenly works! The reading move the debris off of the surface of the disk. Cleaning the destination disk can also fix this. If you use the new Drive/Disk utilities you can test the destination disk to make sure it is good before writing to it.