Downloading problems with WiModem 232 and a UDS-10
Every incoming connection (not outgoing) should be logged. These are volatile though. If you power off or reboot the WiModem232, these are lost and would be blank.

I had to test more than 20 connections to make sure that the list scrolls correctly. After 20 connections the 21st would force the list to move up one position with the oldest entry deleted.

You can easily test this by simply calling the BBS, disconnecting, shutting down the BBS (without powering off the WiModem232) and then use a terminal program to check the log with ATI5. You should see the current time date stamp and IP address.

You can also check to make sure that the TIME/DATE server is working by entering AT*TIME? {RETURN} That should show you the current date & time in Arizona, unless you have changed the UTC offset. The updated manual has information on this.
Reply


Messages In This Thread
RE: Downloading problems with WiModem 232 and a UDS-10 - by admin - 11-24-2022, 12:23 AM



Users browsing this thread: 4 Guest(s)