Downloading problems with WiModem 232 and a UDS-10
#98
Okay, this is really strange! (but you've come to expect that from me and my setup, right?) Smile

In between messages, I tried "ATH1" with a {return} and without at the end of the line in my
F10.MDM file. Neither worked. This was after making sure that I had used the AT*OFFHOOK
command to enter a message and using AT&W to save everything.

As soon as I added "AT*OFFHOOK="message", it works.

I tried it on 2 different WiModem232's with the same result. I also tried another experiment. On
both WiModem232's, I used a message with only the beginning letter capitalized. In the F10.MDM
file, I capitalized the first letter of every word.

When I tried it like that, the message that was displayed with both modems was the one with all
caps from the F10.MDM file.

I did take note of the LED on both and when the ATH1 is issued, both do say offhook.

I dunno Jim. But it is working, even if not in the way that it's supposed to so I'm gonna run with
it. Smile

Thanks!
Reply


Messages In This Thread
RE: Downloading problems with WiModem 232 and a UDS-10 - by DarkLord - 11-10-2022, 07:32 AM



Users browsing this thread: 6 Guest(s)