10-24-2021, 10:13 AM
(08-12-2021, 11:55 AM)admin Wrote: Hmm... I had reports that it works on a PAL machine. Do you have the modem's baud rate set to either 2400 or 9600 before running the WHD program?
I just got the WiModem and everything set up working on a 128 NTSC. Had to cut the trace to disable UP9600 as well (even though 9600 works fine in desterm128 with 80 column mode, but breaks ccgms ).
Just tried getting WHD to work and I get the same error in c64 mode.
NO WIMODEM!
Having said that, if I go into desterm128 and type at!dir it shows the directory header part and a blank disk. At!format worked as well.
2400 nor 9600 baud seems to work in c64 mode. I was thinking it might have been because whd might be tied to up9600 that doesn’t work with my setup in c64 mode. I read that you did a fix that when going into whd, the baud would be set from 2400 to 9600, so maybe that’s why.