DCD doesn't work correctly after firmware update
|
DCD doesn't work correctly after firmware update
|
No, the connection is not actually lost. The BBS software waits for a RING message (or the RI signal if no RING message is configured) and answers with ATA. This is done this way to prevent the modem to answer an incoming call while maintenance tasks are running.
Downgrading to 3.30 solves the issue, so any chang(es) from 3.30 to 3.40 seems to be the culprit. |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
DCD doesn't work correctly after firmware update - by rosenrost - 04-11-2021, 10:37 AM
RE: DCD doesn't work correctly after firmware update - by admin - 04-11-2021, 12:42 PM
RE: DCD doesn't work correctly after firmware update - by rosenrost - 04-12-2021, 02:57 AM
RE: DCD doesn't work correctly after firmware update - by admin - 04-12-2021, 12:27 PM
RE: DCD doesn't work correctly after firmware update - by admin - 04-13-2021, 12:22 AM
RE: DCD doesn't work correctly after firmware update - by rosenrost - 05-08-2021, 09:46 AM
|
