1541 installation
So, it seems that the diagrams for the installation of the cable version of the Supercard+ are not real clear, so I am providing some pictures.

Remove the 6502 from it's socket in the 1541 drive and place it on the Supercard+ board with the notch facing the nearest edge of the board.  Plug the cable end into the 6502 socket with the notch facing towards the back the drive.  Tuck the Supercard+ into the slot between the metal chassis and the plastic case, with the solder side of the board touching the plastic.  Fold the cable over as shown.  That's it!

Attached Files Thumbnail(s)
Can you also post the missing documentation for installation on the 1571 drive?
There's a mention of having to solder an additional wire,
but the docs cut-off, and the above doesn't cover the 1571

so both pics like above for 1571 but at least for me info on that additional wire.
Complete installation instructions for the 1571 are on the backside of disk 1.

Users browsing this thread: 1 Guest(s)