11-22-2017, 09:26 PM
Take a look at the "Huey" and "Duey" chips. See if somewhere in the middle of either chip you see a small burned spot. If so, you damaged the SCP by plugging the cable in backwards. DO NOT use the ASUS cable with fine pitch cable.
Looking at your pictures with the grey cable, it looks like that cable is plugged in backwards into the SCP. With the drive cables I have, the cable exits away from the board, not towards the USB connector. Look at the pictures in the SCP manual.
Looking at your pictures with the grey cable, it looks like that cable is plugged in backwards into the SCP. With the drive cables I have, the cable exits away from the board, not towards the USB connector. Look at the pictures in the SCP manual.