04-19-2017, 10:41 AM
The Huey/Duey chips are the interface buffers for the floppy drive. It sounds like you have (or had) the floppy drive cable plugged in backwards (at either the floppy drive or SuperCard Pro). That typically destroys Huey (and sometimes Duey), but does not affect the USB. That is an isolated system. If the green LED next to the USB connector lights up, then the USB connection is active and working. You might try another USB cable or port.
I hand assemble, program, and test every single board before it goes out so I know they all work. It's likely that you will need to return your board for repair.
What floppy drive and cable are you using?
I hand assemble, program, and test every single board before it goes out so I know they all work. It's likely that you will need to return your board for repair.
What floppy drive and cable are you using?