02-20-2017, 05:39 PM
I had a choice to make the WiModem either RS232 compatible or Commodore modem compatible, and I chose the later. You need a driver to support higher baud rates with any C64 program. A cartridge with a UART is probably what you want to use (like SwiftLink and others).
The WiModem hardware can support up to 4.1 megabaud, but it's interfaced through the user port only, and only a couple of the lines are supported in hardware (DCD, CTS, RxD, and TxD).. nothing else is connected to the user port.
My WiCopy program is using 38400 baud through the standard user port.
The WiModem hardware can support up to 4.1 megabaud, but it's interfaced through the user port only, and only a couple of the lines are supported in hardware (DCD, CTS, RxD, and TxD).. nothing else is connected to the user port.
My WiCopy program is using 38400 baud through the standard user port.