CommdoreServer V-1541 instructions

[scanword]

Who's manual are you looking at?  That's not the manual for the WiModem!  The WiModem manual is in English (only).

To change the baud rate with the WiModem, you use this command:

AT*B[baud]

So, if you wanted to change the baud to 1200 you would type:

AT*B1200<return>

ALL commands start with "AT"... that's why they are called "AT Commands".  

ok now works but after  this operation  the letter are impossible to write and the character are wrong  on keyboart ........

and  after i have load the v 1541  38k but dont work . now i wait for help because i dont know what to do ....bye