01-18-2021, 03:05 PM
I'm trying to understand the UP9600 (hack). I've cut the jumper on my WiModem so I can use it with my C128D. Everything seems to operate fine at 2400baud. It also, seem to be ok at 4800 baud. Even with Desterm I've been able to connect at 9600 and it seems ok.
Some terminals give me all sorts of weirdness after 2400 baud.
I'm just trying to understand what's happening and why 2400 is the upper limit with that jumper cut. But is it? 9600 is working in some cases and it is clearly faster.
Some terminals give me all sorts of weirdness after 2400 baud.
I'm just trying to understand what's happening and why 2400 is the upper limit with that jumper cut. But is it? 9600 is working in some cases and it is clearly faster.