Hi there,
Here is my SuperCard Pro setup which I am still in the processing of putting together:
My setup has the following features:
It will also have an external switch mounted to the rear of the caseĀ that will allow me to be able to switch the SuperCard Pro into its programming mode for firmware updates, but unfortunately the supplier sent out the wrong switch type, so this will need to wait.
Kind regards,
Francis
Here is my SuperCard Pro setup which I am still in the processing of putting together:
My setup has the following features:
- 3 bay case with PSU
- SuperCard Pro (with 32GB MicroSD card fitted, just in case!
)
- 64GB of storage via internally fitted USB drive (handy for storing SCP images
)
- 5.25" floppy disk drive
- 3.5" floppy disk drive
- Memory card reader
- 5x front USB ports (for USB sticks, etc.)
- 2x rearĀ USB ports (for connection to PC)
- Internal USB hub
It will also have an external switch mounted to the rear of the caseĀ that will allow me to be able to switch the SuperCard Pro into its programming mode for firmware updates, but unfortunately the supplier sent out the wrong switch type, so this will need to wait.

Kind regards,
Francis
Dreamland Fantasy Studios
http://www.dfstudios.co.uk
http://www.dfstudios.co.uk