05-15-2014, 06:44 AM
How many 34 pin connectors are on this cable? If there was a twist in the cable (and the drive was at the end of the cable), the drive would show up as drive 0. The twist portion should be nearest the drive itself. Maybe you have the cable backwards? That could explain the issue. With a twist in the cable, the drive will always be 0 at the twist. Because the SuperCard Pro's floppy interface is bi-directional, you can't swap the cable ends like you can with KryoFlux. Take a look at the installation pictures in the SuperCard Pro manual.
The return address is located here:
https://www.cbmstuff.com/contact.htm
The return address is located here:
https://www.cbmstuff.com/contact.htm