04-23-2023, 08:43 PM
I have the WiModem232 connected to the Super Serial Card (in slot 2) with one of those short gender changers. It worked when I got it at 300 baud. I was able to get it online, go to a couple of BBS’s. It was great! I ramped the speed up to 1200 baud successfully a few weeks ago.
Now I can get no response. I’m in ProTERM 3.1 and get nothing at all. No keys are even echoed back to the screen. I just wanted to get an AT command working.
The LED on the WiModem 232 seems normal: it powers up bluish, then a couple red blinks, then solid yellow.
The switches on the SSC are set for 1200 baud, 8N1, modem mode.
I see there is an “emergency mode” to reset the WiModem232 but was wondering if anyone had any ideas I could try first. Thanks for any help!
Now I can get no response. I’m in ProTERM 3.1 and get nothing at all. No keys are even echoed back to the screen. I just wanted to get an AT command working.
The LED on the WiModem 232 seems normal: it powers up bluish, then a couple red blinks, then solid yellow.
The switches on the SSC are set for 1200 baud, 8N1, modem mode.
I see there is an “emergency mode” to reset the WiModem232 but was wondering if anyone had any ideas I could try first. Thanks for any help!