05-10-2023, 02:36 PM
Hi, sorry for my late reply. Work and life got in the way.
The commands currently being sent during startup/init are:
ATH<CR>
ATZ<CR>
ATS0=0<CR>
AT&D2<CR
For hangup and any other place, ~ represents a 0.5s pause, to allow for the forced return to command mode or other timing sensitive init commands.
Is there any way I can get you a log of what's going on?
The commands currently being sent during startup/init are:
ATH<CR>
ATZ<CR>
ATS0=0<CR>
AT&D2<CR
For hangup and any other place, ~ represents a 0.5s pause, to allow for the forced return to command mode or other timing sensitive init commands.
Is there any way I can get you a log of what's going on?