01-27-2022, 12:42 PM
The WiModem232 itself is what is displaying the message about the router, not your terminal. You get the same messages if you don't have it connected to your terminal at all.
If you have the v4.x firmware on the WiModem232 then you can look at the OLED screen and see anything that you have typed on the display. If you see nothing then the WiModem232 is not getting data from your terminal. MAKE SURE you are using a modem cable and not a NULL-MODEM cable!
If you have the v4.x firmware on the WiModem232 then you can look at the OLED screen and see anything that you have typed on the display. If you see nothing then the WiModem232 is not getting data from your terminal. MAKE SURE you are using a modem cable and not a NULL-MODEM cable!