08-07-2021, 12:30 PM
MiSTer doesn't use the USB3.0 as a standard USB connection. It's just a means to have a break out. This requires you use a USB3.0 connector and cable or adapter board. That is too inconvenient for the educational market (which is what the Multi Expansion Board was designed for).
The MEB manual has the pinout for the USER PORT. I don't know what MiSTer actually uses for its USB3.0 connector, I have never looked at it. The pins on P7 are what you should be following from the DE-10 Nano schematic.
The MEB manual has the pinout for the USER PORT. I don't know what MiSTer actually uses for its USB3.0 connector, I have never looked at it. The pins on P7 are what you should be following from the DE-10 Nano schematic.