08-29-2019, 05:47 PM
You MUST install the software in Administrator mode. That error is caused by the driver not being installed, or by not having the SuperCard Pro board plugged in before running the software the first time.
If you don't have the hardware you can still use the software to view some of the features. However, you would need to download the FTDI driver software from the FTDI website, using the self-installer (labeled "setup executable").
https://www.ftdichip.com/Drivers/D2XX.htm
If you don't have the hardware you can still use the software to view some of the features. However, you would need to download the FTDI driver software from the FTDI website, using the self-installer (labeled "setup executable").
https://www.ftdichip.com/Drivers/D2XX.htm