10-06-2019, 07:02 PM
(This post was last modified: 10-06-2019, 07:03 PM by toml_12953.)
(10-06-2019, 12:30 AM)admin Wrote: Sounds like you have the DS0-DS2 jumpers wrong or are using a cable that doesn't have a "twist" in it. That commonly results in the LED being coming on incorrectly.
Have you swapped drives to verify that the disk drive actually works in the drive 1 position?
OK! Problem solved. I had been using a combination 3.5" floppy/media card reader. When I swapped it for a real 3.5" floppy, it worked. I then put in another combination drive which also works. The problem was that the combo drive I had in there to begin with went bad. I'm really looking forward to the firmware that allows the drives connected to the SCP to be used as regular floppy drives! Do you know at this point if they'll work in Win 10? I've heard rumors that XP and above can't recognize 5.25" disks.
Thanks for your help!
Tom L