Acting on Jims advice ..the LEDs were removed and I decided to tackle the problem this way (see photo)

I have fitted a 470 ohm resistor ..and hopefully Jim will provide the other values so I can complete it.

I then have to run 3 pairs of wires out to the compaqt front panel and mount 3 x coloured LEDs..

rgds

VS

I have fitted a 470 ohm resistor ..and hopefully Jim will provide the other values so I can complete it.

I then have to run 3 pairs of wires out to the compaqt front panel and mount 3 x coloured LEDs..

rgds

VS